Setting Up The Optional Speaker Bar; Installing The Speaker Bar - eMachines Flat Panel Monitor User Manual

Setting up the optional speaker bar

Installing the speaker bar

To install the speaker bar:
1
2
3
4
5
www.emachines.com
Headphone jack
Bass port (for bass sound. Do not block.)
Tip (19-inch model)
When using the optional speaker bar, we recommend that you use the
included right-angle VGA cable for the video connection so the speaker bar does not
obstruct the cable. In the United States, if you are using a DVI connection, you can
order a right-angle DVI cable from www.gateway.com.
Tilt the screen back, then center the speaker bar below the screen. Make sure that the
speakers face forward.
Tighten the two thumbscrews on the back of the speaker bar.
Connect the speaker bar's USB power cord to any available USB port on your computer.
Connect the speaker bar's headphone (green) and microphone (pink) cables to your
computer's headphone and microphone jacks.
If your computer is not already on, turn it on.
Power/Volume control Kensington lock slot
Power indicator
Microphone jack Headphone jack
Bass port (for bass sound. Do not block.)
11