Setting Up The Optional Stand; Attaching The Usb Stand - eMachines Flat Panel Monitor User Manual

Setting up the optional stand

Attaching the USB stand

In the United States, you can buy an adjustable USB stand from www.gateway.com. You can adjust
the stand for height, tilt, and screen rotation. When the stand is connected to your computer's
USB port, you can connect up to four USB devices to the USB 2.0 ports on the stand.
To attach the adjustable stand:
1
2
3
4
5
6
Using Your eMachines Flat-Panel Monitor
Make sure that the monitor is turned off.
Place the monitor face-down on a stable, soft (non-marring) surface. A non-slip mat on a
tabletop is ideal. Let the monitor base hang down over the edge of the table.
Remove the screw from the neck hinge, then remove the neck from the LCD panel.
Screw
Remove the four small screws from the back of the LCD panel. Save the four screws.
Screw
Screw
Slide the adjustable stand's neck onto the base.
Screw
Screw