Setting Up The Optional Speaker Bar; Installing The Speaker Bar - eMachines E17T4W User Manual

Using Your eMachines Flat-panel Monitor

Setting up the optional speaker bar

Installing the speaker bar

Tips & Tricks
When using the speaker bar, we
recommend that you use the right-angle
video cable so the speaker bar does not
obstruct the cable.
10
Headphone jack
Bass port
To install the speaker bar:
Tilt the screen back, then center the speaker bar below the screen. Make
1
sure that the speakers face forward.
Tighten the two thumbscrews on the back of the speaker bar.
2
Connect the speaker bar's USB power cord to any available USB port on
3
your computer or on the USB stand.
Connect the speaker bar's headphone (green) and microphone (pink)
4
cables to your computer's headphone and microphone jacks.
If it is not already on, turn on your computer.
5
www.emachines.com
Power/Volume control
Kensington lock slot
Power indicator
Microphone jack Headphone jack
Bass port