Adjusting The Speaker Volume; Setting Display Mode - Sharp LL-T15G4-H - 15" LCD Monitor Operation Manual

Adjusting the screen display and speaker volume

Adjusting the speaker volume

1. Without the OSD Menu being displayed, press
the or the button.
2. Check that [VOLUME] is selected.
If it is not selected, press the
and select [VOLUME].
VOLUME
BRIGHT
SELECT
3. Adjust by pressing the
button (increase).
Note:
- On Screen display for adjustment disappears
several seconds after the last operation.
/ MODE button
button (decrease) or

Setting display mode

Color tone or brightness can be changed with one
command.
STD
Displays image with the color tone results from
original scheme of liquid crystal panel.
OFFICE
Display brightness is lowered. (This mode saves
power.)
sRGB
sRGB is international standard of color
representation specified by IEC (International
Electrotechnical Commission).
Color conversion is made in taking account of
liquid crystal's characteristics and represents
color tone close to its original image.
VIVID
Displays an image with dynamic and vivid
primary colors.
- If [DISPLAY MODE] is set to [sRGB] or [VIVID],
[WHITE BALANCE] is set to [STD].
How to set
Press the / MODE button when the OSD Menu is
not displayed.
Each time the button is pressed the next menu
item appears. (STD → OFFICE →sRGB → VIVID
→ STD)
On Screen display for adjustment disappears
several seconds after the last operation.
15