Advanced Wireless - D-Link DIR-836L Manual

Section 3 - Configuration
Transmit Power: Set the transmit power of the antennas.
WLAN Partition: This enables 802.11d operation. 802.11d is a wireless
specification developed to allow implementation of
wireless networks in countries that cannot use the
802.11 standard. This feature should only be enabled
if you are in a country that requires it.
WMM Enable: WMM is QoS for your wireless network. This will improve
the quality of video and voice applications for your
wireless clients.
Short GI: Check this box to reduce the guard interval time
therefore increasing the data capacity. However, it's less
reliable and may create higher data loss.
HT20/40 Coexistence: Enable this option to reduce interference from
other wireless networks in your area. If the channel
width is operating at 40MHz and there is another
wireless network's channel over-lapping and causing
interference, the router will automatically change to
20MHz.
D-Link DIR-836L User Manual

Advanced Wireless

86