Chicago Electric 98265 Set Up And Operating Instructions Manual page 7

Handle Notch
• Must be far
enough down
the stick to allow
a comfortable and
firm grip.
• Must be deep enough
to prevent hand from
slipping down the
stick.
• Do not cut more than
halfway into the stick
to prevent weakening.
• Corners may be
rounded to increase
comfort.
Stick Length
• Must be long enough
to keep hand clear of
blade.
• At least 6" from end of
handle to closest part
of notch.
• Must be right (90°) angle, cut at 30°-40° from the angle of the
stick to keep hands out of the line of the blade.
• The lower lip of the notch must be no longer than the workpiece
is thick.
SKU 98265 For technical questions, please call 1-800-444-3353.
Essential Straight Push-stick Features and
Note: Straight style (traditional) stick shown. A dif-
ferent stick design may be used if it properly
protects against all hazards.
• Push sticks must be made from sturdy, defect-free,
Notch
Functions
Diagram not to scale.
plywood or normal wood to prevent unexpected
breakage. Material must be at least 1/4" thick, but
no thicker than the finished wood.
• Inspect push stick before use and do not use a
damaged or deteriorated push stick.
• Push stick dimensions will vary depending
on the application and user.
90°
30°-40°
Page 7