Table of Contents
Advertisement
Welding Current
Duty Cycle
Power Consump-
tion
Ground Cable
Torch Power Cable 8 AWG, single insulation, 6 foot
Power Cord
Power Cord Plug
Thermal Overload
Welder Tip
Wire Size
Wire Spool Size
Overall Dimensions 14-1/2" (L) x 7-7/8" (W) x 15-1/2" (H)
Weight
Accessories
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
wArning: when using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
1.
2.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
store idle equipment. When not in use, tools must be stored in a dry location to inhibit
4.
rust. Always lock up tools and keep out of reach of children.
do not force tool. It will do the job better and more safely at the rate for which it was
5.
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
SKU 54878
specifications
.8 mm wire on 16
ga. sheet steel
.8 mm wire on 1/4"
steel plate
10% @ 90 Amps (Maximum Setting) or
10% @ 80 Amps (Minimum Setting, actual 11%)
120 VAC, 24 Amps
4 AWG, single insulation, 6 foot
3-wire, double insulated, 14 AWG, UL Listed
UL Listed
Both settings: 10 min. shutdown, 3 min. back on with Light
0.030"; Spare: Welder Tip 0.035";
Will also accept a 0.023" welder tip (not included)
0.030" flux core wire (when using 0.030" Welder Tip)
4" diameter
34.45 lb.
Spare Welder Tip (0.035")
save this Manual
safety warnings and precautions
for technical questions, please call 1-800-444-3353.
104.3/95.5 Amps
(Maximum/Minimum Setting)
103.7/103.1 Amps
(Maximum/Minimum Setting)
Page 2
Advertisement
Table of Contents
