Epson SureColor F6070 User Manual page 59

Item
Printer Setup Advanced
(Cont'd) Settings
(Cont'd)
Restore Settings
Printer Status Firmware Version
Option Status
Show Total Prints
Print Status Sheet
Description
Paper Size On (Default)
Check
Off
Paper On (Default)
Skew
Off
Check
Cleaning Off (Default)
cycle
Every 1 to 10 pages
Yes
No
xxxxxxx,x.xx,xxxx
No options are currently available for the printer.
XXXXXXX m
(XXXXXX ft
Press the OK button to print a list of current printer
settings.
Choose this option to view settings at a glance.
Choose whether the printer
automatically detects (On) or
does not detect (Off) the paper
width. Try choosing Off if a paper
setting error is displayed when
the paper is correctly loaded.
Note, however, that the printer
may print outside the paper
when Off is selected. If it prints
beyond the edges of the paper,
the inside of the printer becomes
dirty with ink. We generally
recommend to operate with this
setting set to On.
If On is selected, an error will be
displayed in the control panel
and printing will stop if the paper
is skewed; select Off to disable
this feature. On is recommended
in most circumstances as
skewed paper may cause the
printer to jam.
Select when to perform
scheduled head cleaning; you
can select from Off or after every
1 to 10 pages. If Off is selected,
no Cleaning Cycle is used. If you
choose a number between 1
and 10 pages, head cleaning
will be performed automatically
before printing occurs after the
set number of pages is printed.
Select Yes to restore all printer
settings to default values.
You can see the firmware
version.
2
View the total area printed
2
) (six-figure maximum).
Using the Control Panel Menu
59