Do Not Disturb - Lucent Technologies GuestWorks and DEFINITY Enterprise Communications Server Operation Manual

Guestworks and definity enterprise communications server release 8 hospitality operations
Table of Contents

Advertisement

GuestWorks and DEFINITY ECS Release 8
Hospitality Operations 555-230-723
Hospitality Operations
Guest Operations

Do Not Disturb

If your switch is equipped with the Speech Synthesizer circuit pack, guests can
enter their own Do Not Disturb requests. The following instructions should be
provided to your guests so they can access this feature.
During the Do Not Disturb period, all calls are blocked from ringing your
telephone, except for the following:
Emergency calls, cleared through the front desk
Wakeup calls scheduled before your Do Not Disturb period ends
Access to the Do Not Disturb feature is done by using a feature access code or by
using a feature button on the guest telephone.
Enter a Do Not Disturb Request (Feature Dial
Access Code)
1. Pick up the handset of your telephone and enter the Voice Do Not Disturb
feature access code _____.
2. Using the dial keypad, enter the time that you want the Do Not Disturb
time to end, followed by the
start over.
3. Press the
Change or Cancel a Do Not Disturb Request
(Feature Dial Access Code)
1. Pick up the handset of your telephone and enter the Voice Do Not Disturb
feature access code _____.
Listen to the Do Not Disturb instructions. You will hear "You have
reached the Do Not Disturb service. Please enter the time you wish
Do Not Disturb to end, followed by the pound sign."
If you used a time between 13:00 and 00:59, you will hear a
message saying "Thank you. Do Not Disturb is activated. It will be
turned off at _____." You can hang up.
If you used a time between 01:00 and 12:59, you will hear a
message saying "A.M., press 2; P.M., press 7."
button for A.M. or the
2
You will hear a message saying "Thank you. Do Not Disturb is
activated. It will be turned off at _____." You can hang up.
Listen to the instructions. You will hear "You have reached the Do
Not Disturb service. The current time for deactivation is _____.
Press 2 to change; press 3 to deactivate the service now."
button. If you make a mistake, hang up and
#
button for P.M.
7
Issue 6
December 1999
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Definity

Table of Contents