Tv And Video Recorder; Playback Ntsc; Search For And Store The Test Signal Of The Video Recorder; Camera And Camcorder - Hitachi 20LD2500 Instructions For Use Manual

For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to the TV with a SCART
Lead to SCART input.

TV And Video Recorder

• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a SCART Lead to SCART
socket.

Playback NTSC

To use this option you can;
• Connect an NTSC VCR player to SCART
Socket at the rear side of the TV.
or,
• Connect an NTSC VCR player to RCA Jacks
at the rear side of the TV.
Then, press the "AV" button to select proper
source.
Search For And Store The Test
Signal Of The Video Recorder
• Unplug the aerial cable from the aerial
socket "ANT" of your video recorder.
• Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
• Enter the Installation menu in settings
menu. Enter the Programming menu in In-
stallation menu and select manual search.
• Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. Store the test sig-
nal under programme number 0.
– Replace the aerial cable in the aerial
socket "ANT" of your video recorder once
you have stored the test signal.

Camera And Camcorder

To Connect To AV-2 Input
Connect your camera or camcorder to AV-2
input at the rear side of the TV.
• Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You must connect the jacks to the in-
put using the same colour.
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS
input at the rear side of the TV.
• Connect your equipment to the TV via S-VHS
input and audio inputs of AV-2 inputs by us-
ing S-VHS cables.
Connect The Decoder To The
Video Recorder
Some video recorders have a special
SCART Socket for decoder.
• Connect a SCART Lead to the SCART
Socket of your decoder and to the special
SCART Socket of your video recorder. Refer
to the booklet of your video recorder.
• To connect your video recorder to the TV, re-
fer to the TV and Video Recorder section.
If you want to connect more equipments to
your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket at the
rear side of the TV to connect headphones.
- 31 -