Language - Hitachi 20LD2500 Instructions For Use Manual

Up to five separate timer events can be set
and each is displayed in the Timer screen,
showing the event number, the channel to
be selected, the start time, end time, date
and the mode - whether that event is active
(and will be acted on) or not.
TIMER MENU
No Channel Name Start
1. ITV 1 20:00 21:00 12/05/2005
2. BBC ONE 00:00 00:00 01/01/2005
3. BBC ONE 00:00 00:00 01/01/2005
4. BBC ONE 00:00 00:00 01/01/2005
5. BBC ONE 00:00 00:00 01/01/2005
6. BBC ONE 00:00 00:00 01/01/2005
Toggle Mode Exit SELECT
MENU
• To set an event, highlight its mode button
using the or button and press the "SE-
LECT" button to display the timer entry win-
dow.
Name:
Start:
End:
Date:
Mode:
• Here the five settings of channel name, start
time, end time, date and frequency mode
can be set. You can move freely between
each setting using the
• The channel name is set using the
button to display the channel which broad-
casts the programme.
• The start time, end time and date are each
set with the digit buttons on the remote con-
trol in 24-hour format.
• The frequency mode determines how often
the receiver operates this event and is set
button to be either Once ,
with the or
Daily, or Weekly.
If an invalid number for the start or end times
or the date is entered, "Entered time is not
valid" message appears on the menu.
If timer action occurs while the DigitalTV is
watched, the TV switches to the selected
channel. When timer expires, the TV switches
to the channel which it is switched from.
End Date Mode
Active
Inactive
Inactive
Inactive
Inactive
Inactive
i
Edit Timer
3. ITV 1
00:00
00:00
03/06/2005
Once
or buttons.
Selected digital channel will be output via
Scart-1 when in DTV source or if AV1 Output
has been selected as DTV. In Analogue TV
mode, scart output cannot be selected as
DTV, if you switch the Analogue TV, a warn-
ing is displayed.
<M> to cancel
If you accept and select OK, DTV timer is
canceled, TV switches Analogue TV mode,
scart-1 output becomes Analogue TV. You
should connect your VCR to Scart-1 for re-
More
cording digital broadcast.

Language

Some programmes are broadcast in two or
more languages simultaneously. The lan-
guage heard can be selected from the Lan-
guage Menu.
• Press the "M" button to display the Main
Menu and use
Language line and press the "SELECT"
button.
or
• Use the
soundtrack language required and press
the "SELECT" button. Normal viewing, with
the required language soundtrack, can be
resumed by pressing the "M" button.
- 20 -
WARNING
DTV Timer is active
Your action will cancel timer
<OK> to accept
or button to highlight the
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
or button to highlight the
Languages
English