Tv Setup; Common Interface; Analogue Tv Menu System; Picture Menu - Hitachi 20LD2500 Instructions For Use Manual

TV Setup

To be able to go through TV functions, you
can use this item.
The digital TV Setup menu screen is ac-
cessed from the main menu. Press the "M"
button to display the main menu and use
button to highlight "TV Setup", press
or
the "SELECT" button to display TV Setup
menu screen.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup

Common Interface

Detailed information about Sound, Picture
and Feature menus are in AnalogueTV
Menu System section on page 21.
Common Interface
• Press the "M" button to display the Main
Menu and use the
the "Common Interface" line and press the
"SELECT" button.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
It is required to subscribe to a pay channel
company to view the pay channels of the
Digital Terrestrial broadcasting.
Obtain the Conditional Access Module
(CAM) and the Viewing card by subscribing
or button to highlight
to a pay channel company, then insert those
to the Television using the following proce-
dure.
1. Switch off the TV and unplug from the
mains.
2. Insert the CAM, then Viewing Card to the
slot that is located in the terminal cover at
the left-hand side of the TV (from front
view).
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The
CAM or the TV terminal may be damaged if
the CAM is forcefully inserted.
3. Connect the TV to the mains supply,
switch on and then wait for few mo-
ments until the card is activated.
• Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Common Interface then pressing the
"SELECT" button. (CAM set up menu is not
displayed when it is not required.)
• To see the viewing contract information:
Enter IDTV; press the "M" button, then high-
light Common Interface and press the "SE-
LECT" button.
• When no module is inserted, "No Common
Interface module detected" message ap-
pears on the screen.
• Refer to the module instruction manual for
details of the settings.

Analogue TV Menu System

Your TV has been designed with a menu
system to provide easy manipulation of a
multifunction system. Press the "M" (MENU)
button to enter the menu. The "M" button
has two functions; opening or closing the
menu and closing the submenu and then
opening its parent menu.
Press " " / " " button to select a menu title
and then " " / " " button to select a menu
item and " " / " " button
item. To exit a menu press the "M" button.

picture menu

By pressing " " / " " button, select the first
icon. Picture menu appears on the screen.
- 21 -
to enter the menu