Multifunction Display - Mercedes-Benz Command Operator's Manual

Audio
Radio operation

Multifunction display

1 No audio source has been switched on
2 The radio is switched on
3 Frequency band and the memory pre-
set, if applicable
4 Frequency of the station selected
40
5 "SP" (memory) - appears if "Memory"
instead of "Station search" or "Freq."
(depending on model) has been selec-
ted in the "Vehicle" submenu. Refer to
"Control system" in chapter "Controls
in detail" in your vehicle's operating in-
structions for further information.
Press # at the COMAND control
unit to switch on COMAND.
Press c at the COMAND control
unit to switch to radio operation.
Repeatedly press key E or H at
the multifunction steering wheel until
display 2 appears.