Manually Setting Date And Clock - Mercedes-Benz Command Operator's Manual

Manually setting date and clock

You must manually set the date and clock,
if
COMAND does not receive a GPS time
the clock has been disconnected from
the vehicle battery
the dates of the change between sum-
mer and winter time are not available
1
Date/time menu
1 Day, month, year, hours, minutes
Day is highlighted when the menu
appears
Turn the right-hand rotary/push-button
v to highlight "Date/Time..." in the
settings menu ( page 188) and press
to confirm.
The menu displays date and time.
Info Services/System settings
Setting
Press the right-hand rotary/push-
button v.
The day appears in red letters, setting
mode is active.
Move the day forwards or back
Turn the right-hand rotary/push-button
v to the right or left.
Press the right-hand rotary/push-
button v.
P82.85-7719-31
The day appears in black letters, set-
ting mode is switched off. The cursor
moves one position to the right.
Repeat the operating steps to subse-
quently change month, year, hours and
minutes.
System settings
195