Download Print this page
Hide thumbs Also See for Entourage CIS:

Advertisement

Quick Links

Installation Guide
GPS vehicle security, recovery
and location awareness

Advertisement

loading

Summary of Contents for Escort Entourage CIS

  • Page 1 Installation Guide GPS vehicle security, recovery and location awareness...
  • Page 3 Welcome! The ESCORT® Entourage™ CIS vehicle security, recovery & GPS locator device powered by Blackline GPS™ is a state-of-the-art protection solution for cars, trucks, SUVs, minivans, RVs, motorcycles, and other vehicles. Entourage CIS is conveniently installed in a hidden location within a vehicle. This ensures stealthy operation while continuing to deliver high performance GPS tracking.
  • Page 4: Installation

    Installation ESCORT recommends that an automotive service center perform this work for you. Installation time varies depending on the installation location and your vehicle model. Installation requires approximately 30 to 90 minutes. Please read the following installation instructions before you begin.
  • Page 5 Choose where to install Entourage CIS Prior to installation, ensure that you and your customer agree upon the Entourage CIS installation location When choosing a location to place the Entourage CIS device, consider the following: • Choose a location near 12VDC or 24VDC power •...
  • Page 6 Hardwiring Entourage CIS Entourage CIS is hardwired to the vehicle’s power system with its built-in 2m (6.5’) power cable. Entourage CIS is compatible with both 12 VDC 24 VDC vehicle power systems. Entourage CIS must be wired to a continuous source of power that is not controlled by the ignition key.
  • Page 7 The easiest method to hardwire Entourage CIS is as follows: • Using the automotive test light, identify a non-switched 12V / 24V wire (a wire not controlled by the ignition key). Please note: Entourage CIS Entourage CIS Wire consumes up to 1A peak current in very short bursts. Disconnect the negative connection to the vehicle’s battery •...
  • Page 8: Verifying Installation

    Other methods to hardwire Entourage CIS include: • Wiring Entourage CIS directly to the vehicle’s battery terminals. This is an advanced technique, and not described within this guide • Hardwiring Entourage CIS to the vehicle’s power system using soldering techniques. Soldering techniques are not described within this document.
  • Page 9 If the power cable has been incorrectly connected, either no indicator lights turn on or the red and green indicator lights will blink rapidly for 5 seconds. In this case: · Power is not connected, or · Power is connected with the incorrect polarity, or ·...
  • Page 10 Mounting Entourage CIS There are two methods to mount Entourage CIS. The first uses the supplied Velcro fasteners: • Ensure that the vehicle mounting surface is clean and dry • Adhere the mated pair of Velcro fasteners to Entourage CIS as shown below (do not separate the Velcro-mated pair) •...
  • Page 11 (together “Representatives”), which would give rise to a cause of action in tort, contract or any other doctrine of law. ESCORT and the ESCORT logo are trademarks and/or registered trademarks of Escort, Inc., in the U.S., Canada, and/or other countries and used under license. © Copyright 2009 Blackline GPS Corp. All rights reserved.
  • Page 12 DOC-0052-AA...