No Audio From The Projector When Connecting With Easymp; Network Projection; When A Connection Is Made Using Easymp Network Projection, A Powerpoint Slide Show Cannot Be Started; When A Connection Has Been Made Using Easymp Network - Epson PowerLite 1760W Operation Manual

Troubleshooting
No audio from the projector when connecting with EasyMP Network Projection.
Check
Are multiple projectors connected to one computer?
Is audio set to output from the computer in Set Options?

When a connection is made using EasyMP Network Projection, a PowerPoint Slide Show cannot be started.

Check
Was EasyMP Network Projection started while PowerPoint
was running?
(For Windows)
When a connection has been made using EasyMP Network Projection, the screen will not be refreshed when using an

Office application.

Check
Is the mouse moved continuously?
Audio can only be transferred to one projector. Try disconnecting other projectors.
Select Output audio from the projector on the Audio Output tab.
s "Audio Output tab" p.36
When connecting with EasyMP Network Projection, make sure you close PowerPoint first. Slide Show
might not run if connecting while PowerPoint is running.
When you stop moving the mouse cursor, the screen is updated. If the screen does not update
quickly, stop moving the mouse cursor.
Remedy
Remedy
Remedy
44