Abbreviated Dialing (Ad) - Lucent Technologies DEFINITY Guide Manual

Highlights
This change description document describes the changes incorporated in
DEFINITY Enterprise Communications Server (ECS), Release 6, Issue 2.1
(02.1.125.1).
Platform
Offer Category
For R6.2, two offer categories are supported. Category A is used for DEFINITY
ECS R6 and DEFINITY ProLogix Solutions systems. Category B is used for
DEFINITY BCS Issue 4.0 and GuestWorks server Issue 4.0 systems. See
DEFINITY ECS R6 Administration and Feature Description , 555-230-522, Issue 3
for administration details. See DEFINITY ECS R6 System Description Pocket
Reference , 555-230-211, Issue 2.0 or later for details about which features and
hardware are allowed with each offer category.
In R6, Issue 2.1, changes were made to allow execution of mtce, list, and
display commands, as well as administration of an external modem prior to
administration of the category.
Highlights of Features and Enhancements

Abbreviated Dialing (AD)

Using an abbreviated dialing button for end-to-end signaling was possible only
from the originating station or after a trunk flash when the call included a single
trunk that was administered to support trunk flash. Now, a terminating station can
use an abbreviated dialing button to do end-to-end signaling on any facilities that
can generate the tones.
1
Issue 2 May 1998