Epson Stylus COLOR 660 Service Manual page 26

EPSON Stylus Color 660
3. Click "Check the present counter values". The screen below
appears.
Figure 5-14. Check the present counter values
4. If the present counter value is over 9800 points, advice your
customer to replace the Waste ink drain pad with new one.
Chapter 5 Adjustment
[Clearing the current protection counter value]
Be sure to replace the installed waste ink pad with a
new one after or before you clear the current protection
counter value.
1. From the maintenance menu (Figure 5-8), select "Indication of the
counter value". The Protection counter CHECK / CLEAR Screen
shown in Figure 5-13 appears.
2. Click "Clear the protect counter values" on the screen. The screen
shown below appears.
Figure 5-15. Clear the protection counter values
3. Click OK. At the bottom of the screen, it says "The protect counter
has been reset to zero".
Revision A
26