Epson EPL-N2700 Service Manual page 110

EPL-N2700 Optional Units
15. Slide the rail guide up to the
mark on the label of the rail
guide. Make sure the rail
guide makes a click sound
when it is securely inserted in
the unit. The rail guide should
be securely in place and
should not slide out of even
when you attempt to pull the
Tray Section.
16. Remove the 2 seals that are affixed to the top of the printer and
install the upper attachment. Make sure to insert the guide pins of
the upper attachment into the 2 holes located under the seals on the
top of the printer. Additionally, ensure that the 2 hooks in the side of
the upper attachment fit into the installation holes in the cover on the
fuser unit side.
Figure 5-13. Installation - 12
10-Bin Unit
Figure 5-12. Installation - 11
Installing the 10-Bin Unit
17. Position the Horizontal Transport Unit on top of the printer. Make
sure the gear fixture of the unit is placed inside the catch on the Tray
Section.
Figure 5-14. Installation - 13
Be sure to use both hands when positioning the
Horizontal Transport Unit.
Revision A
110