Interface Specification; Operations; Control Panel; Buttons - Epson Stylus COLOR 300 Service Manual

EPSON Stylus Color 300 Service Manual

1.3 INTERFACE SPECIFICATION

Refer to the service manual of EPSON Stylus Color 200 / Stylus 200 for details.

1.4 OPERATIONS

This section describes the basic operation of the printer.

1.4.1 Control Panel

The control panel is equipped with two non-lock type push buttons and three LED
indicators, and operations of each button and LED indicator are described below.

1.4.1.1 Buttons

Y
Normal Operation
Button
LOAD/EJECT
CLEANING
1-12
LED Indicators
PAPER OUT (Red)
INK OUT (Red)
POWER (Green)
Figure 1-7. Control Panel
Table 1-10. Control Panel - Normal Operations
Operation
Pressed less than
3 sec.
Pressed for 3 sec.
Pressed less than
3 sec.
Pressed for 3 sec.
Function
Loads or ejects the paper.
When the carriage is at the ink-cartridge
replace position, return the carriage to the
home position.
Starts the ink-cartridge replace operation and
the carriage moves to the ink-cartridge
replace position.
Starts the cleaning operation.
When the printer is in "Ink Low", "Ink Out" or
"No ink cartridge" status, the printer moves the
carriage to the ink-cartridge replace position.
When the carriage is at the ink-cartridge
replace position, return the carriage to the
home position.
Buttons
LOAD/EJECT
CLEANING
Rev. A