Pull out the paper guide at the back of the printer until you hear
it click into place. This guide helps keep the incoming paper from
catching on the printer cable, Then fit the notches in the bottom
corners of the separator over the pins at the front of the paper slot.
The separator keeps the paper that is coming out of the printer
from being pulled back in.
Figure 1-2. Paper separator and paper guide
When you want to use single sheet paper in your LX-SO, you
can remove the tractor unit quite easily. Just push back the two
tractor release levers shown in Figure l-3, tilt the unit backward,
and lift it up,
You will find the instructions for loading continuous paper in your
Printer's Manual.
Figure 1-3. Tractor release levers
Printed in Japan 85.01-20