Epson Printer Interface Cartridge for the Apple IIc Operation Manual page 100

1-5 controls the paper-end detector. When it is ON, the detec-
Switch
tor is inactive, causing printing to continue when the printer is out of
paper. When it is OFF, the printer stops when the end of the paper
passes the paper-end detector. See Paper Out Sensor in Chapter
6.
select the international character set as
Switches and
7-6, 1-7, 7-8
shown in Table
D-2.
Table D-2. International DIP switch settings
controls the printing of zeroes. When it is ON, the zeroes
Switch 2-1
are slashed when it is OFF, they are not.
(0);
regulates the way the LX-90 handles the eighth bit on codes
Switch 2-2
sent to it. When the switch is OFF, the printer makes the eighth bit
equal to zero. When it is ON, the printer does not change the eighth
bit. For more information, see "Problem Codes" in Appendix E.
controls line feeds. When it is ON, the adds an auto-
Switch 2-3
LX-90
matic line feed to each carriage return; when it is OFF, it does not. If
your printing has an extra space between lines, turn the switch OFF, If
all the lines of your printing are on top of each other, turn the switch
ON.
enables the beeper to sound when it is OFF; when it is ON,
Switch 2-4
the beeper cannot sound.
D-3