Table of Contents
Advertisement
3. Attaching the Machine Parts Removed for Shipment
3.1 Pedal
6
Sewing units for jacket fabrication are equipped with only one pedal.
Those equipped for trouser fabrication have a left and a right pedal.
1
2
3
The pedal 3 is to be attached at the lower cross spar 4:
–
Attach pedal 3 with the angle 5 on the lower cross spar 4.
The slots in angle 5 make possible an adaption to different work
heights.
Align the height of angle 5 so that pedal 3 can be optimally
operated.
–
Hook in the pedal bar 2.
–
Loosen clamping screw 1 slightly.
–
Set the height of the pedal bar 2 so that the pedal is horizontal
when stepped down to the stop.
–
Tighten clamping screw 1.
4
5
Advertisement
Table of Contents
