Lubrication - Duerkopp Adler 550-16-23 Operating Instructions Manual

7.2

Lubrication

Maintenance work
to be carried out
Lubrication of the machine
head
28
1
Caution Risk of Injury !
Oil can cause skin rashes.
Avoid longer skin contact.
After contact wash yourself thoroughly.
ATTENTION !
The handling and disposal of mineral oils is subject to legal
regulations.
Deliver used oil to an authorized reception point.
Protect your environment.
Take care not to spill any oil.
For lubrication of the special sewing machine, use exclusively the
lubrication oil ESSO-SP-NK 10 or an equivalent oil with the following
specification:
–
Viscosity at 40° C:
–
Flash point:
ESSO SP-NK 10 can be obtained from the sales offices of
DÜRKOPP ADLER AG under the following parts numbers:
2 liter container:
5 liter container:
Explanation
The lubrication of the machine head occurs via a central
oil wick system. Except for the hook all bearings are
lubricated via the oil reservoir 1.
- The oil level should not drop below the mark "MIN"
.
- Fill oil up to the "MAX" mark through the drilled hole
in the viewing glass.
10 mm²/s
150° C
9047 000013
9047 000014
Service-
hours
40