Table of Contents
Advertisement
6. INSTALLING THE BELT COVER
WARNING:
To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine
and check to be sure that the motor has totally stopped rotating in prior.
7. ADJUSTING THE HEIGHT OF THE KNEE LIFTER
WARNING:
To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine
and check to be sure that the motor has totally stopped rotating in prior.
1) The standard height of the presser foot lifted using the knee lifter is 10 mm.
2) You can adjust the presser foot lift up to 13 mm using knee lifter adjust screw
3) When you have adjusted the presser foot lift to over 10 mm, be sure that the bottom end of needle bar
in its lowest position does not hit presser foot
3
.
-3-
1
. (Max. 9 mm for A type)
2
Hide quick links:
Advertisement
Table of Contents
