Epson FX-880 Service Manual page 77

7. The carriage width select menu appears. Move the cursor using " " or " " key to select "(1) 80
column" and press "Return" key.
8. The main menu appears. Move the cursor using " " or " " key to select "(2) FF paper" from
the list and press "Return" key. The test pattern printing starts.
9. After the test pattern is printed out, turn off the printer once to install the factory setting into
the EEPROM.
10. Press "ESC" key several times to quite the program.
CAUTION
„ As this adjustment program is just same as the check program in the
„ The factory setting value is not installed into the EEPROM without
Rev. A
Program : xxxxx
9 pins VR 0 = x
[ Carriage Width ]
>(1) 80 column
(2) 106 column
(3) 136 column
Program : xxxxx
9 pins VR 0 = x
[ Main Menu ]
(1) Bi-D Adjust
>(2)FF paper
(3) ---- N/A ----
factory and includes many other check items which are not needed
for service, you should not performed any items which are not
described in this manual. Otherwise, the printer functions are not
guaranteed.
this FF paper printing.
Setting:
VR 1 = x VR 2 = x
** In line**
Setting:
VR 1 = x VR 2 = x
** In line**
(6) Envelope
(7) – SUB MENU
FX-880 Service Manual
Chapter 5 Adjustment
5-5