Grill Final Assembly - Char-Broil Patio Bistro 10601514 Assembly Manual

7
ASSEMBLY GUIDE
C1 –
C2 –
C3 –
Step 1
- With the Grill Lid open, place the Cooking Grate (C1)into the Grill Base, allowing it to rest on the three brackets
spaced around the Grill Base. Be sure the slots in the Cooking Grate are facing the front of thegrill. Place the Warming Rack
(C2) into position by first hooking the center pins into the windshield, then rotate the warming rack down into position.
Step 2
- Install the Grease Tray (C3) by sliding the tray onto the Grease Tray Rails from the rear of the grill. Note: The
grease tray rests between the grease tray rail stops. See detail shown in Figure A.
Visit
Part Qty.
Cooking Grate
1
Warming Rack 1
Grease tray 1
Slots to
the front
of the grill.
C1
Grease
Tray
Rails
www.sizzleonthegrill.com/user-forums to chat with Patio Bistro® owners just like you!

GRILL FINAL Assembly

NOTE: The Cooking Grate may
have sharp edges. Be very careful
when handling the Cooking Grate.
You should wear gloves when
handling the Cooking Grate.
C2
Fig. A
C3
Grease
Tray
Rail Stops