Hanna Instruments HI 98713 Instruction Manual page 34

• Press LOG/CFM to save the change. The new
instrument ID will be displayed.
Alternatively, press CAL to exit without saving
the changes.
SET BAUD RATE
The HI 98713 has a RS232 and a USB link. When
the USB connection is used, the RS232 connection
becomes inactive.
To successfully communicate with the PC, the same
baud rate must be selected on the instrument and
on the PC application. The available baud rates are
1200, 2400, 4800 and 9600.
• To set the baud rate, press CAL when set baud
rate panel is displayed.
The parameter value and "CFM" tag will start
blinking.
• Press the UP or DOWN keys to select the new
baud rate value.
• Press LOG/CFM to save the change. The new
selected baud rate will be displayed.
Alternatively, press CAL to exit without saving
the changes.
34