Radio Operation - Eonon D1306 User Manual

RADIO OPERATION

Selecting the radio mode, the TFT display as the follows:
1.Band Selector
In radio mode, repeatedly press BAND/P/N button on the unit or on the remote control
OR >/< button on the touch screen to select a band in the following order:
2.Manual/Automatic Tuning
(1).Automatic Tuning: Press
the direction of lower frequency or higher frequency.
(2). Manual Tuning: Press
one step respectively until the desired station frequency is displayed.
*Press(press and hold)
3.Recalling a preset station
A total of 30preset stations (18-FM,12-MW) are available in memory.
Press / button on the remote control to recall a preset station.
The display shows the preset number and frequency of the stored station, touch one of
these to select a corresponding station to listening.
*Press one of the station preset button on the remote control also selects preset station.
4.Automatic/Manual Store
Auto store is a function for storing up to 6 stations.
(1)Select the desired band.
(2)Hold down AMS button ,the stations with good reception are stored automatically.
Manual store: turn in a station you wish to store in the preset memory, press and hold
one the preset buttons (1-6) that you want to store on.
*If you store a station in a preset memory which already has a station the current station
will be cleared and replaced with the new station.
5.DX/LOC Selector
In radio mode, press LOC button on the remote control to select strong or weak station
reception.
(1). It is set to LOC mode when LOC button is first pressed. Loc:ON appears on the
screen and only strong signal station will be tuned.
(2).It is switched to DX mode when Loc: OFF is pressed again. Both strong and weak
stations can be received.
Note: The initial mode is DX mode.
6.MO/ST Selector
In FM of radio mode, you can press ST button on the remote control to select Mono mode
or Stereo mode.
18
FM1 P6 87.50MHz
FM1
FM2
MW2 MW1
/ button on the remote control to search for a station in
or button repeatedly to move downward or upward
/ button on panel also performs the operation.
FM3