Radio Interface 5 - Eonon DB Series Instruction Manual

Multimedia
Basic Operations
Functions of the Remote Controller
1 3 0 29 28
2 2 7
3
25
4
5
23
6
21
7
8
9
1 0 18
11
12 17
13
14
Instructions Car
1. The power supply switch
2. Press this audio source key to return to the main
interface and press it again to resume the previous
mode.
3. Press the key to display the current displayer
information when you play a DVD or use a USB device
2 6
or an SD card.
24
4. Press AUDIO to select a language (in DVD mode) or
change a sound track (in VCD mode) when you play a
2 2
DVD, or use a USB device or an SD card
2 0
5. Press ENTER to confirm menu operations.
1 9
6. Press these keys to enable right or left selection when
you use a USB device or SD card. These keys become
right and left cursors when you set up a DVD.
16
7. Press SLOW to slow down the speed of a DVD, an SD
card or a USB device.
8. Press the stop key once to stop playing a DVD, USB
device or SD card. Press the play key to resume, and
then press the stop key twice to stop the media.
15
9. Press the key to play or pause the DVD, USB device
or SD card.
24
Instructions Car
Radio Interface
A high-quality FM/AM tuner is set in the device to support auto-search and the storage of FM/AM channels,
frequency display, and frequency trim.
The following figure shows the FM channel control interface:
15 14
1
2 3
/ .
1 10 Touch the key for a short time to gradually tune to previous channels or for a long time to semi-automatically search
previous channels.
Touch the key for a short time to tune to next channels or for a long time to semi-automatically search next channels.
2. Touch the key to change bands among FM1, FM2, FM3, AM1 and Am2.
3. Touch the key for a short time to view pre-stored channels. Touch the key for a longer time to automatically search
channels and store channels (with strong signals) in the pre-storage pane.
.
4 For FM, touch the key to switch from ST to MONO and vice versa (the default is MONO). AM does not have this function.
. .
5 Local or remote selection 6 PTY: program type
9.AF: Touch any channel No. in the pre-storage pane to play the channel. Touch a channel No. in this pane for a longer time
to store the current channel. Note: Press or hold figure keys 1 to 6 to implement this function.
12. Touch the key to increase or decrease the volume or switch to mute mode.
13. The key displays Bluetooth connection status.
14. Touch the key. The screen will become black, but the system can still operate. Touch anywhere on the screen to return
to the previous screen. 15. Touch the key to return to the main interface.
Multimedia
13 12
10
9
4 5 6 7 8
.
7. TA: TA identification 8 AF: Alternative frequencies list
5