Power Switch - Cerwin-Vega XD3 Instruction Manual

⑦ Speaker Out Connection & Speaker Input Connection
For complete stereo sound, the right speaker must be connected to the left
speaker. Using the supplied 2-conductor speaker cable, connect the 'output to
right speaker' to the 'input front left speaker'. Be sure to note the color
polarity to maintain the best audio performance. The left speaker's red jack
should be connected to the right speaker's red jack. The left speaker's black
jack should be connected to the right speaker's black jack.
⑧ Vega-Bass Selector
The Vega-Bass selector delivers a quick way to tailor the XD3 speaker system to
your personal preference. With the Vega-Bass selector set to 'On', the XD3
speaker will increase the bass response (increase low frequency gain). With
the Vega-Bass selector set to 'Off', the XD3 speaker will be set to a more
natural even response.

⑨ Power Switch

The main power switch is located on the rear of the left speaker. To use the
XD3 speaker system, be sure the power switch is set to the 'ON' position. When
the XD3 speaker system is not in use, set the power switch to the 'OFF'
position.
⑩ AC Power Inlet
The 'AC IN' must be connected to a power outlet to use the XD3 speaker
system. Use only the power cord provided with the XD3 system. Be sure the
power cord is firmly secured into the AC power inlet.
⑪ Reinforced Rear -Firing Bass Port
On both left and right speakers is a custom low-frequency tuned base port. The
port allows low frequency signals to be released thus enhancing the overall
bass response. Avoid placing the speaker against a flat surface such as a wall, to
prevent restriction of the bass port.
7