Cerwin-Vega XD3 Instruction Manual page 10

Connections
STEP A: Situate the left and right speakers in the desired locations. Connect the
2-conductor speaker wire in between the left and right speakers.
STEP B: Connect the output from the computer or portable media player to the
input of the left speaker.
STEP C: Set the volume knob, located on the front of the left speaker, to the
most counter-clockwise position. Be sure the power switch on the left speaker
is set to 'OFF'. Connect the power cord from an acceptable power socket to the
'AC IN' located on the rear of the left speaker.
STEP D: Turn the power switch on the left speaker to 'ON'. Next, apply audio to
the XD3 speaker system by playing music from the computer or portable media
player.
STEP E: Slowly turn the volume knob clockwise until the desired volume has
been reached.
9