Reading Area Shot Data - Eclipse CD5100 Owner's Manual

Reading Area Shot data

The Area Shot data that has been downloaded
from E-iSERV (web site) to a USB memory or
CD-R can be loaded into the main unit and saved
there.
Press the [CUSTOM/MENU] button
1
for more than one second.
The Menu Selection mode is activated.
Press the [SELECT] (Upper/ Lower)
2
button to select FUNC then press
the [ENTER] button.
The function mode is activated.
Press the [SELECT] (Upper/ Lower)
3
button to select the AreaShot.
4
Press the [ENTER] button.
Area Shot setting mode is activated.
Press the [SELECT] (Upper/ Lower)
5
to select the Data.
6
Press the [ENTER] button.
The media selection
appear.
Press the
7
Lower) to select the Disc or USB.
8
Press the [ENTER] button.
• When selecting a CD-R:
The front panel opens automatically.
• When selecting a USB memory:
The message appears until the USB
memory is connected.
Insert the CD-R or connect USB
9
memory to be used for read the
Area Shot data.
If there are no correct files on the CD-
R or USB memory, "NO DATA" is
displayed.
screen
[SELECT] (Upper/
How to operate the Area Shot function (U.S.A./CANADA only)
Press the
10
Lower) button to select the saving
file.
11
Press the [ENTER] button.
The selected file will be saved.
"READING"
reading has finished, [COMPLETED]
will appear on the display and then it
will return to the display for selecting
the function
appears if the system is unable to read
the file.
ATTENTION
• When playing a music file in USB memory, E-
iSERV data stored in the USB memory cannot
be read into the main unit.
• To load data into the main unit, you have to
make a special folder. For detail information
about how to make the folder, refer to the E-
iSERV manuals.
CAUTION
will
• Do not turn the ignition switch or power
to the main unit ON or OFF (or remove
the front panel of the main unit) while
data reading is in progress. Data
reading will be interrupted and data may
be damaged.
• Only the
can be operated while the system is
reading data. Disconnecting the USB
memory or ejecting the CD-R stops
reading the data and the data will not be
saved in the main unit.
[SELECT] (Upper/
is displayed.
mode. [NO
(OPEN/EJECT)
[ ]
When
DATA]
VIII
button
41