Key Pad On The Machine Arm - Duerkopp Adler 669 Instruction Manual

6.15 Key pad on the machine arm

8
7
6
Key
1 Supplementary tread tension
Button is back-lit: the supplementary thread tension is
activated.
Button is not back-lit: the supplementary thread
tension is not activated.
2 2. Stitch length
Button is back-lit: long stitch length (upper dial) is
activated
Button is not back-lit: small stitch length (lower dial) is
activated
3 Invoke or suppress the start/final bartacks.
If the start and final bartacks are activated, then the
next bartack is deactivated when the button is
pressed.
If the start and final bartacks are not activated, then
the next bartack is activated when the button is
pressed.
4 Move the needle to the upper or lower position.
The function of the button can be set with the
parameter F-242.
1 = needle up/down
2 = needle up
3 = single stitch
4 = full stitch
5 = needle to position 2
The factory default setting is 1 (needle up/down).
5 Sew backwards manually.
The machine sews backwards for as long as the
button is held down.
5 4 3 2
Function
1
23
GB