Position Of Needle And Needle Hole - Duerkopp Adler 609 Service Instructions Manual

2.

Position of needle and needle hole

2 1
Caution Risk of Injury!
Turn the main switch off.
Check and set the position of the needle and needle hole only when
the sewing machine is turned off.
Rule and control
The needle-bar link must be standing over the needle hole, so that the
needle penetrates the middle of the hole.
Adjustment
–
Take off the material presser foot.
–
Turn the handwheel until the needle is positioned directly over the
needle hole.
–
Loosen screw 2.
–
Align the needle-bar link.
–
Tighten screw 2 again.
–
Mount and align material presser foot 1.
GB
5