Advertisement
Selecting Programs by Category
Select by Category function available in Program and Combi modes – for quick access to related sounds
Press PROG key
1.
highlight Select by Category
(above EXIT key) to highlight Index number of Program to use the Audition Riff function, press AUDITION key press
INC key to scroll through and listen to new riffs for each Program in selected category.
To change categories, press > CURSOR key to highlight Cat: (category currently selected)
2.
to move to new Category – Audition Riff function will continue
(below Cancel) to exit Select by Category function.
Playing Combinations
640 internal / 1664 Combis available when fully expanded – each Combi allows for split, layer and velocity-switching of up
to 8 Programs , plus dual polyphonic arpeggiators!
Press COMBI key
1.
Demonstrate Select by Category function in COMBI mode – works the same way as in Program mode above, but the
2.
Audition Riff function is not available in COMBI mode.
!
EXB-PCM Expansion boards: If the TRITON Rack you are working with includes installed EXB-PCM boards, you can
access and play the Programs and Combis by pressing the BANK key, then selecting the desired EXB A-H BANK keys,
followed by the Program/Combi numbers.
The Arpeggiators
2 programmable Polyphonic Arpeggiators - 5 preset / 328 user programmable arpeggio patterns; store 1 per Programs, 2
per Combination, 2 per Multi; sync to MIDI clock with external sequencers; use as a step-grid drum pattern programming
tool
Select Combination A000 Romance Layers
1.
press SELECT key (above the floppy drive) until C LED lights, play and rotate knobs 1-3 to control TEMPO, GATE and
VELOCITY
press ARP ON/OFF key to turn Arpgeggiator off.
!
Many Programs and Combis are set to automatically turn on the Arpeggiator function when selected. For instance, select
COMBI INT-A001 Lonely Moon, and note that the ARP ON/OFF LED is lit. Play your controller to trigger the pre-assigned
patterns.
!
Most Programs and Combis include pre-assigned arpeggiator patterns. Try selecting PROGRAM INT-A019 Camera
Strings, and then press the ARP ON/OFF key to turn the Arpeggiator on (lit). Play your controller to hear the pre-assigned
pattern.
select and play from controller - any Program
press F8 key (below OK) to display Programs by Category
use front panel BANK and INC/DEC keys or DIAL to select and play Combis.
press ARP ON/OFF key to turn Arpeggiator on, then trigger from controller
press F8 key (below UTILITY)
press AUDITION key to stop playback
3
TRITON Rack EasyStart
press F7 key to
press < CURSOR key
press INC key (or use DIAL)
press F7 key
Advertisement
