Random Play); Scanning Programs; Multi-Changer Selection - Alpine CRA-1667RF Owner's Manual

M.I.X. (Random Play)
1
Press the M.I.X. button on the Remote Control in the
play or pause mode.
The tracks on the disc will be played back in a random
sequence. After all the tracks on a disc have finished
playing back, the tracks of the next disc will be played
back.
ALL M.I.X. will also be selectable.
In this mode, the tracks on all the CDs in the current
magazine will be included in the random playback
sequence.
→ →
M.I.X. ALL M.I.X.
To cancel M.I.X. play, press the M.I.X. button to turn off
the M.I.X.

Scanning Programs

1
Press the SCAN button on the Remote Control to
activate the Scan mode.
The first 10 seconds of each track will be played back
in succession.
To stop scanning, press the SCAN button and
deactivate the Scan mode.

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers,
the KCA-400C (Multi-Changer Switching device)
must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2
Switching devices, you can connect up to 6 CD
Changers. When using KCA-410C (Versatile Link
Terminal), you can connect two changers and two
external outputs (AUX).
1
Press the SOURCE button of the Remote Display or
the Remote Control to activate the CD Changer mode.
2
Press the BAND button on the Remote Control to
activate the CD Changer Selection mode.
3
Press the BAND button on the Remote Control until
the desired changer indicator appears on the display.
NOTE
If the selected CD Changer is not connected, the display will
show "NO CHG".
4
To operate the selected changer.
NOTE
For further details about the external input (AUX) when using
KCA-410C, see "Setting the AUX Mode (V-Link)" on page 6.
→
(off)
9
-EN