Carrier 23XL Installation Instructions Manual page 28

LEGEND
1 — Chilled Water Pump Starter
2 — Condenser Water Pump Starter
3 — Cooling Tower Fan Starter
4 — Condenser Water Pump
5 — Chilled Water Pump
6 — Disconnect
7 — Freestanding Compressor Motor Starter
8 — Compressor Motor Terminal Box
9 — Power Panel (Hidden)
10 — Vents
Piping
Control Wiring
Power Wiring
Fig. 28 — Typical 23XL with Free-Standing Starter (Frame 1 and 2 Machines)
NOTES:
1. Wiring and piping shown are for general point-of-connection only and are not
intended to show details for a specific installation. Certified field wiring and di-
mensional diagrams are available on request. 23XL machines should be in-
stalled using certified drawings.
2. All wiring must comply with applicable codes.
3. Refer to Carrier System Design Manual for details regarding piping techniques.
4. Wiring not shown for optional devices such as:
• remote start/stop
• remote alarm
• optional safety device
• 4 to 20 mA resets
• optional remote sensors
28