Canceling Polling Receiving; Polling Sending; Setting Up The Polling Box - Canon LASER CLASS 1060P User Manual

Canceling Polling Receiving

To cancel polling receiving, follow the same procedure as for canceling receiving
(1 p. 8-15).

Polling Sending

In polling sending, your unit holds a document in its polling box so that other fax
machines can retrieve it.
You may find polling sending convenient in the following situations:
– A company department might store a document in the unit so that other departments
can retrieve it if they require that document.
– When you want the other party to retrieve a document from your unit at their
convenience.
– When you want the other party to bear the transmission cost of receiving a document
from your unit.

Setting Up the Polling Box

This section explains how to set up the unit's polling box so that you can scan a
document into it for other fax machines to retrieve it.
Before setting up the polling box, be sure to read the following:
• You can set an ITU-T-standard password for the polling box to restrict being polled
only by fax machines that have this exact password (see the instructions that follow).
Make sure you contact the other party to inform them of your password. Do not set a
password if the other party's fax machine does not support password transactions.
• Your unit can be set to hold the document in its polling box until it is polled by one fax
machine, or it can be set to continue to hold it so that several fax machines can
retrieve the document (see below for details).
Follow this procedure to set up the polling box:
1
Open the one-touch speed dial panel.
2
Press Data Registration.
3
Press Set.
4 Use ∂ or ¨ to select POLLING BOX.
Chapter 9
DATA REGSTRATION
USER SETTINGS
POLLING BOX
Special Features
9-11