AMI UEFI BIOS Flash SOP for DOS
Flash Scenarios
- For end-user ONLY. Currently, ALL ODMs should NOT use it to flash SBIOS. It will cause
unexpected problem since some BIOS block data maybe different between old and new
BIOS.
- It will keep DMI and setup settings.
- QTC team can simulate user's behavior by using it.
- QTC team can simulate user's behavior by using it.
- For AMD platform, you need to flash BIOS with command (Afudos ..\ROM\XXX.ROM) from
win 7 upgrade to win8. Then, follow the below steps ([Flash 4M BIOS]) to flash BIOS again.
- For Intel platform, you need to follow other SOP(AMI UEFI BIOS Flash SOP for DOS with
ME) from win7 upgrade to win8.
Flash UEFI BIOS SOP for DOS
1. Press "Del" enter BIOS Setup Menu.
2. In "Authentication" page, Set "Secure Boot" function as "Disabled".
2-16
0
0
0
System Utilities