Volvo 240 Owner's Manual page 120

Volvo 1990 240 Model
several thin paint coats and let dry after each application.
pg. 89 Paint touch-up
3 If there is a longer scratch, you may want to mask to protect surrounding paint.
Touching-up damaged paint on fender edges and sills
Material:
Primer-spray can
Paint-spray can
Masking tape
Note: When touching-up the car, it should be clean and dry. The surface temperature should be above
60 ° F (+15 ° C).
When large surfaces have to be repainted, suitably mask the surrounding area with masking tape and
paper. Remove this masking as soon as the final coat has been sprayed on, before the paint dries.
1 Remove loose flakes of paint with masking tape. Shake the spray can for at least 1 minute. Spray the
primer on.
file:///K|/ownersdocs/1990/1990_240/90240_18.htm (6 of 8)12/30/2006 8:25:11 AM