Setup Basics; Getting Help; In Case Of Problems - TYAN S8228 Notice

3.3 - Setup Basics

The table below shows how to navigate in the setup program using the
keyboard.
Key
<F1>
<ESC>
  arrow keys
↑ or ↓ arrow keys
<Tab> / <Shift-Tab>
<Home> / <End>
<PgUp> / <PgDn>
<->
<+>
<F8>
<F9>
<F10>
<Enter>

3.4 - Getting Help

Pressing [F1] will display a small help window that describes the
appropriate keys to use and the possible selections for the highlighted
item. To exit the Help Window, press [ESC].

3.5 - In Case of Problems

If you have trouble booting your computer after making and saving the
changes with the BIOS setup program, you can restart the computer by
holding the power button down until the computer shuts off (usually within
4 seconds); resetting by pressing CTRL-ALT-DEL; or clearing the
CMOS.The best advice is to only alter settings that you thoroughly under-
stand. In particular, do not change settings in the Chipset section unless
you are absolutely sure of what you are doing. The Chipset defaults have
been carefully chosen either by TYAN
best performance and reliability. Even a seemingly small change to the
Chipset setup options may cause the system to become unstable or
unusable.
The following pages provide the details of BIOS menu. Please be noticed
that the BIOS menu are continually changing due to the BIOS updating.
The BIOS menu provided are the most updated when this manual is
written. Please visit TYAN
information of BIOS updating.
General help window
Exit current menu
Select a different menu
Move cursor up/down
Cycle cursor up/down
Move cursor to top/bottom of the window
Move cursor to next/previous page
Select the previous value/setting of the field
Select the next value/setting of the field
Load Fail Safe default configuration values of the menu
Load the Optimal default configuration values of the
menu
Save and exit
Execute command or select submenu
®
®
's website at http://www.TYAN.com for the
34
http://www.TYAN.com
Function
or your system manufacturer for