2.2
Rack Mounting
After installing the necessary components, the Trophy NR18 system can be mount-
ed in a rack using the supplied rack mounting kit.
•
Mounting Ears x 2 + Screws
•
Extended Mounting Plates x 2 + Screws
Installing the Server in a Rack
Follow these instructions to mount the Trophy NR18 into an industry standard 19"
rack.
Note:
Before mounting the Trophy NR18 in a rack, ensure that all internal components
have been installed and that the unit has been fully tested. Maintenance can be
performed on the unit while in a rack but it is preferable to install the device in a
fully operational condition.
Screws List
Right: M3 x L4
Middle: #6 x 32 x L5
Left: M5 x L4
2-12