2.4 Installing the Processor and Heat sink
The S8232 supported AMD
Specifications on page 4. Check our website at
processor support.
NOTE:
MiTAC is not liable for damage as a result of operating an
unsupported configuration.
Processor Installation (G34 1944-pin Socket for AMD CPU)
Follow the steps below to install the processors and heat sinks. Please note that the
illustrations are based on a G34 1944-pin Socket which may not look exactly like
the motherboard you purchased. Therefore, the illustrations should be held for your
reference only.
NOTE:
If only one processor is installed, start with CPU0 first.
1.
Locate the CPU socket.
2.
Pull the CPU lever slightly away from the socket and then push it to a fully
open position.
®
processors are listed in section Hardware
28
http://www.tyan.com
http://www.tyan.com
for latest