Installing The Processor And Heat Sink - TYAN S5565 Manual

2.6 Installing the Processor and Heat sink

The S5565 supported Intel
Specifications on page 5. Check our website at
processor support.
NOTE: MITAC TYAN is not liable for damage as a result of operating an
unsupported configuration.
Installing Processor (in Socket LGA1700)
Follow the steps below to install the processors and heat sinks.
NOTE: Please save and replace the CPU protection cap when returning for service.
1. Open the ILM lever.
2. Open the load plate using the finger tab.
®
processors are listed in section 1.2 Hardware
25
http://www.tyan.com
http://www.tyan.com for latest