Print Settings - Dymo Label Software User's Manual

Table 1. DYMO Tape Printer Page Size and Margin Settings
Paper Name
24 mm Label
This section shows you how to print from within Microsoft Word to a DYMO tape printer.
However, printing from applications other than Word follows the same basic steps.
To print from Microsoft Word
1
2
3
4
5
6
7
8
9

Print Settings

This section discusses several printer settings that may optimize your printing.
Tape Cassette Color Setting
Print settings on DYMO tape printers are based on the color of the label tape. To optimize the print
quality, make sure you set the tape cassette color setting to match the color of the tape in the printer.
To set the tape cassette color
1
Paper
Height
1"
(24 mm)
Type the text to be printed into a Microsoft Word document.
Select Print from the File menu.
The Print dialog box appears.
Select the tape printer from the list of printers, if not already selected, and click Close.
Select Page Setup or Print Setup from the File menu.
The Page Setup dialog box appears.
On the Margins tab, enter the margin values for the top, bottom, left, and right margins based
on the labels you have loaded in the printer.
Refer to Table 1 for the correct settings.
Click the Paper Size tab.
Select the label size you have loaded in the printer from the Paper size drop-down list.
The width and height values should now match the values for that label size shown in Table 1.
Select Landscape under Orientation and click OK.
Click to print the label.
Select Tape Cassette Color from the Format menu.
Paper Top
Width Margin
3.5" 0.23"
(89 mm) (5.8 mm)
Print Settings
Bottom Left
Margin Margin
0.24" 0.4"
(6.1 mm) (10.2 mm)
Right
Margin
0.39"
(9.9 mm)
37