Skil 5995 Operating Instructions Manual page 23

SM 1619X02639 06-10:1619X02639 12-08 6/18/10 3:04 PM Page 23
If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-
wire extension cords that have 3-prong plugs
and receptacles.
NOTE: The smaller the gauge number, the
heavier the cord.
(*= standard equipment)
(**= optional accessories)
* 5-3/8" 18 tooth carbide blade, wrench,
battery pack, and charger.
Accessories
RECOMMENDED SIZES OF ExTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Cord Size in A.W.G.
Tool's
Ampere
Cord Length in Feet
Rating
** rip fence
2
Wire Sizes in mm
Cord Length in Meters