Hook Lubrication - Duerkopp Adler 281 Service Instructions Manual

10. Hook lubrication

Maintenance work
to be carried out
Lubrication of
the hook
32
(only subclasses with oil lubricated hook)
2
Caution: Risk of injury!
Oil can cause skin eruptions.
Avoid protracted contact with the skin.
In event of contact, thoroughly wash the affected area.
ATTENTION !
The handling and disposal of mineral oils is subject to legal regulation.
Deliver used oil to an authorised collection point.
Protect your environment.
Take care not to spill oil.
Explanation
The oil level shall not fall below the MIN level of the oil
reservoir 1.
Fill up the DA 10 oil through the bore hole 2 up to the
marking line "Max".
Oil grade being used
Special lubricating oil DA 10 / colourless / resistant to light and ageing
resistant / high wear and corrosion protection
Viscosity / 40°C: 10 mm²/s - ISO VG10
The oil can be obtained from Dürkopp Adler with the following parts
numbers:
·
1 litre container 9047 000012
·
5 litre container 9047 000014
Please note !
In the machine equipped with an oil-free hook (subclass 281-140442)
no oil filling up is necessary.
1
Operating
hours
8