Dual XDVD3101 Installation & Owner's Manual page 11

Reset
To resolve abnormal operation or if the unit is inoperable, use the tip of a pen
to press the RESET button (located on the front panel to the left of the OPEN
button).
Audio Setup From any operational mode (except when viewing video), press the
in the bottom left corner of the screen to access the Audio menu.
Levels
Position
Setup
Crossover
Exit Audio Setup After audio adjustment is complete, press
screen.
The unit will reset the main processor to the default settings.
• EQ - Press  or 
(User, Flat, Jazz, Pop, Rock, Soft, Vocal, Classic, Dance, Movie and
Hip-Hop), or manually adjust the subwoofer (SW), bass (BASS),
midrange (MID) or treble (TREB) levels by manually dragging the
slider bar right or left.
• Loudness - Press Off or On to deactivate or activate the Loudness
feature.
• Balance - Drag the slider bar to adjust Balance Left or Right.
• Fader - Drag the slider bar to adjust Fader Front or Rear.
• Bass - Select a Bass setting: 60Hz, 80Hz, 100Hz, or 200Hz.
• Midrange - Select a Midrange setting: 500Hz, 1KHz, 1.5KHz or 2.5KHz.
• Treble - Select a Treble setting: 10KHz, 12.5KHz, 15KHz or 17.5KHz.
• Select setting for the Subwoofer Low-Pass Filter: 80Hz, 120Hz or 160Hz.
XDVD3101 OPERATION
General Operation
to s
elect between the preset equalization curves
to return to the previous
icon
10