TYAN Toledo i3100 S5207 User Manual page 21

Memory Installation Procedure
When you install the memory modules, make sure the module aligns properly with the
memory slot. The modules are keyed to ensure that it is inserted only one
method of installing memory modules are detailed by the following diagrams.
1. Press the locking levers in the direction shown in the following illustration.
2. Align the memory module with the socket. The memory module is keyed to fit only
one way in the socket.
3. Seat the module firmly into the socket by gently pressing down until it sits flush
with the socket. The locking levers pop up into place.
To remove the memory module, simply push the latches outwards until the memory
module pops up.
TIP: When installing memory, a module may require a considerable amount of force to
seat properly, although this is very rare. To avoid bending and damaging your
motherboard, place it on its anti-static bag and onto a flat surface, and then proceed with
memory installation.
YOU MUST ALWAYS unplug the power connector to the
NOTE motherboard before performing system hardware changes, to
avoid damaging the board or expansion device.
21
http://www.TYAN.com
way. The